The MLX90641-D55 Thermal Camera is a small size, non-contact, and low-cost IR array thermal imaging camera, with a resolution of 16 12 pixels. It will detect the IR distribution of objects in the field of view, turn the data into the surface temperature of the objects by calculation, and then generate thermal images. This module has been designed for easy integration into industrial or intelligent control applications. This module is great for use in microcontroller-based projects as well as with the popular SBCs on the market today and would be perfect in your next Raspberry Pi, Arduino, or Adafruit Feather HUZZAH project. Note: The Raspberry Pi is NOT included Features Features an MLX90641 far-infrared thermal sensor array with a resolution of 16 12 pixels Communion via I2C Bus, configurable up to 1MHz data rate Noise Equivalent Temperature Difference (NETD) 0.1K RMS@4Hz refresh rate Onboard voltage regulation, compatible with 3.3V / 5V operating voltage Programable frame rate 0.564Hz (0.2532FPS) Comes with development resources and manual (examples for Raspberry Pi/Arduino(ESP32)/STM32) Specifications Operating voltage: 3.3V/5V Operating current: 12mA Communication interface: I2C (adds 0 x 33) Field of view (HorizontalVresertical): 55 x 35 Operating temperature: -40C125C Target temperature: -40C300C Resolution: 2C (ambient temp. 0~50) Refresh rate: 0.5Hz~64Hz (programmable) Dimensions: 28mm x 16 mm Mounting hole size: 2.0mm Resources Waveshare Wiki Pinout VCC – 3.3V/5V power supply GND – power ground SDA – I2C data pin SCL – I2C clock pin Package Contents 1x – MLX90641-D55 Thermal Camera 1x – PH2.0 4-PIN wire