+

Free shipping on orders over $40

100% Secure Checkout | 30-Day Easy Returns

Limited Time Offer: Take 30% Off

Shopping Cart

Menu

SIM7600E-H 4G HAT for Raspberry Pi (LTE Cat-4)

Original price was: $37.45.Current price is: $29.96.

This is a 4G CAT-4/3G/2G network HAT based on the SIMcom SIM7600E-H for the Raspberry Pi which accepts a 1.8V/3V sim card and supports a...

  • Category : GPIO
  • Sku : UWGM435410

This is a 4G CAT-4/3G/2G network HAT based on the SIMcom SIM7600E-H for the Raspberry Pi which accepts a 1.8V/3V sim card and supports a range of LTE Cat-4 network bands, including phone calls via AT commands and SMS functionality! Speeds of up to 50Mbps Uplink* and 150Mbps Downlink* are possible on a 4G network via the onboard SIMcom SIM7600E-H module. The HAT supports GNSS positioning via the GPS, Beidou, GLONASS and LBS Base satellite systems and includes an onboard audio jack and audio decoder support making telephone calls. The HAT includes a USB interface for testing AT commands, obtaining GPS data etc, whilst the onboard CP2102 UART converter allows for serial debugging. UART breakout pins are also included for use with other development boards. LED indicators assist with debugging, showing the operating status. A MicroSD card slot is included on the board for storing data such as messages and files. Included in the package is the HAT, an LTE antenna, external GPS antenna, two Micro-USB cables and fixings! * Idealised data rate – actual data rate depends on factors like network coverage, traffic congestion, base station condition etc. Your mileage may vary. Features Standard Raspberry Pi 40-pin GPIO extension header Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP Supports GPS, BeiDou, Glonass and LBS base station positioning Onboard USB interface, to test AT Commands and obtain GPS positioning data Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Arduino SIM card slot supports 1.8V/3V SIM cards TF card slot for storing data like files, messages etc Onboard audio jack and audio decoder for making telephone calls 2x LED indicators, easy to monitor the operating status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps) Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT Online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino) Package Contents 1x SIM7600E-H 4G HAT 1x LTE Antenna 1x GPS External Antenna (B) 2x USB type A plug to micro plug cable 1x RPi screws pack (2pcs) Resources Product Wiki and Guide What\’s Onboard 1) SIM7600E-H2) CP2102 USB to UART converter3) NAU8810 audio decoder4) TXS0108EPWR voltage translator – Translates 3.3V/5V into 1.8V5) MP2128DT power chip6) MP1482 power chip7) Raspberry Pi GPIO header8) SIM7600 control interface – For connecting with host boards like Arduino/STM329) SIM card slot – Supports 1.8V/3V SIM card10) TF card slot – Allows data storage like files, messages, etc.11) 3.5mm earphone/mic jack12) USB interface – For testing AT Commands, getting GPS positioning data, etc.13) USB to UART interface – For serial debugging, or login to Raspberry Pi14) MAIN antenna connector15) AUX antenna connector16) GNSS antenna connector17) Power switch18) Network status indicator19) Power indicator20) Operating voltage selection jumper – Configured via 0 resistor jumper – VCCIO – 3.3V: set operating voltage as 3.3V – VCCIO – 5V: set operating voltage as 5V21) UART selection jumper – A: access Raspberry Pi via USB to UART – B: control the SIM7600 by Raspberry Pi – C: control the SIM7600 via USB to UART22) PWR configuration jumper – PWR – 3V3: auto startup on power-up (default) – PWR – D6: startup/shutdown by the Raspberry Pi D6 pin Flight mode configuration jumper – NC by default, no flight mode control pin – Flight – D4: flight mode is controlled by the Raspberry Pi D4 pin23) USB connector solder pads24) BOOT forced programming solder pads Specifications Frequency Band LTE Cat-4 LTE-FDD: B1/B3/B5/B7/B8/B20 LTE-TDD: B38/B40/B41 3G UMTS/HSPA+: B1/B5/B8 2G GSM/GPRS/EDGE: 900/1800 MHz GNSS Satellite systems GPS/Beidou/GLONASS Receiver type 16-channel C/A Code Sensitivity -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BeiDou) Cold starts: -148 dBm Time-To-First-Fix (open air) Cold starts: <35s Hot starts: <1s SMS and Audio SMS Supported types: MT, MO, CB, Text, PDU Storage: USIM card and ME (default) Audio feature Supports echo cancellation Supports noise reduction Other Power supply 5V Operating voltage 5V / 3.3V (configured via jumper) Operating temperature -30C ~ 80C Storage temperature -45C ~ 90C Dimensions 56.21mm 65.15mm Pinout

There are no reviews yet.
Add a review

Your email address will not be published. Required fields are marked *

Related Products