This DC motor driver has been designed specifically for the Raspberry Pi Pico and can PWM control up to 4 DC motors at a constant current of 1.2A (3.2A peak). Power input between 6-12V can be applied, which conveniently powers the Raspberry Pi Pico thanks to the onboard 5V regulator. An on/off switch and power indicator LED add to this convenience, alongside a breakout section for unused GPIO pins. Online development resources are available, which include wiring guidance andadditional information. A Raspberry Pi Pico is not included – click here if you\’d like to buy one. Your Pico will need to havemale headers soldered to it with the pins pointing downwards (or grab one of our Pre-soldered Picos). Features Compatible with the Raspberry Pi Pico I2C controlled, supports 32xdifferent I2C addresses by setting the 5 address jumpers Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed Onboard TB6612FNG dual H-bridge motor driver Integrates 5V regulator, up to 3A output current, can be powered from a battery through the VIN terminal Breaks out unused pins of the Pico for easy extension Specifications Operating voltage: 6~12V (VIN terminals) Logic level: 3.3V PWM driver: PCA9685 Motor driver: TB6612FNG Control interface: I2C Dimensions: 65 x 56mm Package Contents 1x Pico Motor Driver Raspberry Pi Pico and motors not included Resources Product Wiki & Manual Pinout