This white128×64OLEDmodule has anSPI/I2Cinterface for a fast data rate, and it allows you to connect to many differentdevelopment boards, includingRaspberry Pi,Arduino,STM32, and others! With its bright white colour, anSSD1315 driver,and an ultra-narrow bezel with an onboard voltage translator, this is a small but powerful module that you can use with many different projects! SmallOLEDmodules are a popular option for adding a simple display to your project for monitoring data, displaying IP addresses, weather, counters or anything else you decide to code! Be sure to check out ourtutorial showing how to use this with the Raspberry Pi Pico usingI2Cor check outTony\’s article showing how to use it with a Pico andSPI! Note: Does NOT come with a Raspberry Pi board Connection Example – Raspberry Pi via SPI Interface Features Ultra-narrow bezel, compact size, with onboard voltage translator 4-wire SPI and I2C interfaces, better compatibility, fast data rate Comes with online development resources (examples for Raspberry Pi/Arduino/STM32) Specifications OPERATING VOLTAGE 3.3V / 5V RESOLUTION 128 64 pixels COMMUNICATION INTERFACE 4-wire SPI / I2C DISPLAY SIZE 21.74 11.18 mm DISPLAY COLOUR (C): upper yellow & lower blue; (D): white; (E): blue DISPLAY PANEL OLED PIXEL SIZE 0.15 0.15 mm DRIVER SSD1315 MODULE SIZE 26.00 26.00mm Resources Product Wiki Using an SSD1315 OLED with the Raspberry Pi Pico (I2C) MicroPython Skill Builders – #7 SPI OLED Displays Pinout RES Reset, low active DC Data/Command selection (high for data, low for command) CS Chip selection, low active CLK Clock input DIN Data input GND Ground VCC Power (3.3V / 5V input) Package Contents 1x 0.96\” OLED Module 1x Jumper cable 7-pin female-female